Configuration Reset Screen; Figure 55 Configuration Restore; Figure 56 Configuration Reset; Figure 57 Confirm Restore Factory Default Settings - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

Figure 55 Configuration Restore

Type the path and file name of the configuration file you wish to restore in the File Path text
box or click Browse to display a Choose File screen from which you can locate it. After you
have specified the file, click Restore. "conf-0" is the name of the configuration file on the
system, so your backup configuration file is automatically renamed when you restore using
this screen.

8.3 Configuration Reset Screen

Click Maintenance > Config Reset in the navigation panel to open the following screen. Use
this screen to clear all system configuration information that you have configured and return to
the factory defaults.

Figure 56 Configuration Reset

Click Reset to return the system to the factory default settings.

Figure 57 Confirm Restore Factory Default Settings

Click OK to begin resetting all system configurations to the factory defaults and then wait for
the system to restart. This takes up to two minutes. If you want to access the web configurator
again, you may need to change the IP address of your computer to be in the same subnet as
that of the default system IP address (192.168.1.1).
112 Chapter 8 Maintenance Screens