MSC1000G User's Guide
Table 24 Alarm Port Setup (continued)
LABEL
Copy
ID
State
Card Type
Up Time
Firmware
6.3.1 Alarm Port Setup Slot Screen
Click the slot number of a line card in the Alarm Port Setup screen to display the screen
shown next.
Figure 47 Alarm Port Setup: Slot
98
DESCRIPTION
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This is the slot number of a line card. Click the index number of an active line card to
display the Alarm Port Setup Slot screen where you can view and copy settings
from one port to another port or ports on the selected line card.
This field displays whether a line card is active or not.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it was
started.
This field displays the current firmware version installed on the line card.
Chapter 6 Alarm Screens