ZyXEL Communications MSC1000G User Manual page 262

MSC1000G User's Guide
Table 116 acl Commands (continued)
COMMAND
pppoeagent
rule
262
set <slot-port>
<type>
show <slot>
clearinfo <vid>
enable <vid>
delete <vid>
disable <vid>
info <vid>
<description>
set <vid>
show
delete <slot-port-vpi/
vci> <profile>
set <slot-port-vpi/
vci> <profile>
show <slot-port-vpi/
vci>
DESCRIPTION
Sets the packet type filter for the
specified subscriber ports.
<type> = accept-all, pppoe-only,
or any combination of ip, arp,
dhcp, eapol, pppoe, netbios, igmp
separated by a space.
Displays packet type filter settings. L
Resets PPPoE line description for
the VLAN.
Enables PPPoE line information
for the VLAN. The switch adds the
line information to PPPoE packets
for identification and security.
Deletes PPPoE line information
settings.
Deactivate PPPoE line information
insertion.
Sets PPPoE line information.
Enter a description (up to 24
characters).
Creates a PPPoE agent entry for
the VLAN.
Displays PPPoE line information
settings.
Upstream access control rules
allows you to apply profiles on the
subscriber line PVC.
Removes the ACL profile.
Applies the ACL profile. You can
apply up to 8 profiles to a PVC.
Displays ACL profile settings for a
PVC.
Chapter 16 Commands
P
M
M
M
M
M
M
M
L
M
M
L