Figure 36-2 Sys Version Command Example; Figure 36-3 Sys Monitor Status Command Example; Sys Version; Sys Monitor Status - ZyXEL Communications Dimension ES-4024 User Manual

Dimension ES-4024 Ethernet Switch
If you clear a log (using the sys log clear command), you cannot view it again.
36.2.3

sys version

Syntax:
sys version
This command shows the RAS code, firmware version, system uptime and bootbase version.
An example is shown next.
ES-4024> sys version
ZyNOS version: V3.50(DU.0)b8 | 08/18/2003
romRasSize: 1513458
system up time:
bootbase version: V1.0 | 04/25/2003
36.2.4

sys monitor status

Syntax:
sys monitor status
This command shows the hardware monitor's status.
An example is shown next.
ES-4024> sys monitor status
Time V0
---------- ------ ------ ------ ------ ------ ----- ----- ----- ----- ----- ----- ----- --------
345 2.512
36.2.5 sys sw vlan1q vlan list
Syntax:
sys sw vlan1q vlan list <all|VID|start_VID|end_VID>
where
<all|VID|start
_VID|end_VID>=
This command displays the IEEE 802.1Q tagged VLAN table. An example is shown next.
36-2
0:03:37 (550d ticks)

Figure 36-2 sys version Command Example

V1 V2 V3
1.840 3.296 12.160 4.992

Figure 36-3 sys monitor status Command Example

Specify either all of the VLAN entries (
range of VLAN IDs starting from a certain VID (
VLAN Ids ending at a specific VID (
V4 T0 T1 T2
33.0 32.0 32.0
F00 F01 F02 F10
5882 6010 5967 5841 00000000
), a single VLAN ID (
all
start_VID
).
end_VID
Command Examples
Error
) or a
VID
) or a range of