Figure 77 Vdsl Port Setup; Table 44 Vdsl Port Setup - ZyXEL Communications MSC1000G User Manual

Figure 77 VDSL Port Setup

The following table describes the fields in this screen.

Table 44 VDSL Port Setup

LABEL
Slot
Port
Load
Enable
VDSL Profile
Frequency
Bandplan
Alarm Profile
Customer
Information
Telephone No.
Advanced
Features
VLAN
Chapter 10 DSL Port Setup Screens
DESCRIPTION
Select the number of a line card's slot.
Select the number of a DSL port on the line card.
Click Load to display the port's settings in the fields below.
Select this check box to turn on this port.
Select a VDSL line profile to assign to this port. Use the VDSL Profile screen to
configure VDSL port profiles.
Select a profile defined by the VDSL standard from the drop-down list box. Refer to
Table 47 on page 139 for profile information.
Specify a band plan in this field.
Select 997 for symmetric connections.
Select 998 for asymmetric connections.
Select an alarm profile to define the thresholds that trigger an alarm on the port
when exceeded.
Enter information to identify the subscriber connected to this DSL port. You can
use up to 31 printable ASCII characters (including spaces and hyphens).
Enter information to identify the telephone number of the subscriber connected to
this DSL port. You can use up to 15 ASCII characters (including spaces and
hyphens).
Click the Setup button to open a screen where you can configure the VDSL port's
detailed settings.
Click the Setup button to open a screen where you can configure the VLAN
settings for the VDSL port.
MSC1000G User's Guide
135