This chapter describes the configuration file management commands.
20.1 config Commands Summary
The following table lists the
administrator privilege level needed to use the command (H for high, M for middle or L for
low).
Table 134 config Commands
COMMAND
config
default
save
show
20.1.1 config default Command
Syntax:
ras> config default
This command resets the system to the factory default configuration. The system restarts with
the factory default settings.
Note: Do not turn off your device while returning to the default configuration.
20.1.2 config save Command
Syntax:
ras> config save
Chapter 20 config Commands
config Commands
commands. The P column on the right indicates the
config
sys|ip|switch|por
t|profile|acl|vla
n|multicast|all
[nopause]
C
H A P T E R
DESCRIPTION
Resets factory default configuration.
Saves current configuration to non-
volatile memory.
Displays the current configuration.
MSC1000G User's Guide
2 0
P
H
M
L
327