Hardware Connections; Front Panel; Leds; Figure 3 Msc1000G Front Panel - ZyXEL Communications MSC1000G User Manual

This chapter introduces the management switch card's hardware and how to connect it.
Note: Refer to the Integrated Ethernet Switch's User's Guide for directions and safety
warnings on installing the management switch card.
Use this chapter's port and slot descriptions to connect the management switch
card.

2.1 Front Panel

Figure 3 MSC1000G Front Panel

2.2 LEDs

Table 1 Management Switch Card LED Descriptions

LED COLOR STATUS
PWR Green
ALM Red
SYS Green

Chapter 2 Hardware Connections

Hardware Connections

DESCRIPTION
On The management switch card is installed and receiving power from the
main chassis.
Off The management switch card is not receiving power from the main
chassis.
On An alarm has been detected on the MSC1000G, the Integrated Ethernet
Switch fan or the INPUT ALARM terminals. Examples of an alarm on
the MSC1000G are when the MSC1000G's voltage or temperature is
outside of the normal range.
Off The MSC1000G has not detected an alarm on itself, the Integrated
Ethernet Switch fan or the INPUT ALARM terminals.
Blinking The system is initializing.
On The management switch card is on and functioning properly.
Off The management switch card is not receiving power, is not ready or has
malfunctioned.
MSC1000G User's Guide
C
H A P T E R
2
51