ZyXEL Communications MSC1000G User Manual page 343

Ies-5000 series management switch card

Hide thumbs Also See for MSC1000G:

Table of Contents

Table 139 lcman show Command: Detailed Information (continued)

current voltage

Chapter 23 lcman Commands

This is the release of firmware that the card is using.

This is the driver version that a DSL line card's DSL chip is using.

This is the release of modem code that a DSL line card is using.

These are the voltages (in volts) measured at the card's sensors. An "*"

indicates the voltage is outside of the configured thresholds.

These are the temperatures (in degrees Celsius) measured at the card's

sensors. An "*" indicates the temperature is outside of the configured

MSC1000G User's Guide

Troubleshooting