Sys Client Disable Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
This command turns on a secured client set.
The following example turns on secured client set 1.
ras> sys client enable 1

29.3.6 sys client disable Command

Syntax:
sys client disable <index>
This command turns off a secured client set.
The following example turns off secured client set 1.
ras> sys client disable 1
29.3.7 sys client show Command
Syntax:
sys client show
This command displays the secured client settings. These are the IP addresses of trusted
computers that can manage the MSC and the services that they can use.
An example is shown next. A "V" in a column means that the secured client set is activated or
the services can be used for managing the MSC.
ras> sys client show
secured client:
idx enable start ip
--- ------ --------------- --------------- ------ --- --- ---- --- ----
1 yes
2 no
3 no
4 no
ras>
29.3.8 sys time show Command
Syntax:
sys time show
492
end ip
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0
telnet ftp web icmp ssh snmp
V V V V
- - - -
- - - -
- - - -
Chapter 29 sys Commands
V V
- -
- -
- -