Ip Ping Screen; Figure 51 F5 Loopback; Table 31 F5 Loopback - ZyXEL Communications MSC1000G User Manual

Ies-5000 series management switch card

Hide thumbs Also See for MSC1000G:

Table of Contents

The following table describes the labels in this screen.

7.3 IP Ping Screen

Click Diagnostic > IP Ping in the navigation panel to display this screen. Use this screen to

ping IP addresses.

Chapter 7 Diagnostic Screens

Select slot and port numbers from the Slot and Port drop-down list boxes and enter a

VPI/VCI to specify a PVC. Click test to perform an OAMF5 loopback test on the

specified DSL port. An Operational, Administration and Maintenance Function 5 test is

used to test the connection between two DSL devices. First, the DSL devices establish

a virtual circuit. Then the local device sends an ATM F5 cell to be returned by the

remote DSL device (both DSL devices must support ATM F5 in order to use this test).

The results ("Passed" or "Failed") display in the multi-line text box.

MSC1000G User's Guide