1 Access the Remote Device Reset screen from the Maintenance screen.
Figure 79 Maintenance: Remote Device Reset
2 Select the VDSL line(s) you want to reset in the list box. You can select multiple entries
by holding down the [SHIFT] or [CTRL] key.
3 Click Reset to reset the selected VDSL line(s).
Resetting the VDSL lines does NOT restart the switch.
25.7 Firmware Upgrade
You can only upload the firmware of the same VDSL standard as your Switch.
Use the show hardware-version command to check whether your device
is a VDSL1 switch (100100, or 10050) or VDSL2 switch (5030). See
1 on page 31
Table 59 Switch Hardware Version
HARDWARE VERSION
100100
10050
5030
Make sure you have downloaded (and unzipped) the correct model firmware and version to
your computer before uploading to the device.
Be sure to upload the correct model firmware as uploading the wrong model
firmware may damage your device.
VES-1616F-3x Series User's Guide
and
Chapter 32 on page 209
STANDARD
VDSL1
VDSL1
VDSL2
Chapter 25 Maintenance
for more information.
Chapter
173