Acl Dot1X Port Reauth Command - ZyXEL Communications MSC1000G User Manual

17.4.7 acl dot1x port reauth Command

Syntax:
acl dot1x port reauth <slot-port> on|off
This command enables or disables the IEEE 802.1X re-authentication option for the specified
subscriber ports.
17.4.8 acl dot1x port show Command
Syntax:
acl dot1x port show <slot>
This command displays the IEEE 802.1X settings of the subscriber ports on the line card in the
specified slot.
ras> acl dot1x port show 5
port enable control reauth period
---- ------ ------- ------ ------
5- 1 -
5- 2 -
5- 3 -
5- 4 -
5- 5 -
-------------------------- [ snip ] --------------------------
5-45 -
5-46 -
5-47 -
5-48 -
17.4.9 acl dot1x radius ip Command
Syntax:
acl dot1x radius ip <index> <ip>
where
<index>
<ip>
This command sets the IP address of the specified external RADIUS server.
Chapter 17 acl Commands
auto V 3600
auto V 3600
auto V 3600
auto V 3600
auto V 3600
auto V 3600
auto V 3600
auto V 3600
auto V 3600
= The index number of an external RADIUS server entry (1 or 2).
= This IP address of the external RADIUS server.
MSC1000G User's Guide
303