ZyXEL Communications MSC1000G User Manual page 294

MSC1000G User's Guide
Table 130 acl Commands (continued)
COMMAND
ouifilter
pktfilter
pppoeagent
294
enable <slot-port>
mode <slot-port>
<accept|deny>
<slot-port> <mac> Adds a MAC filter MAC address
set
show <slot>|<slot-
port>
<slot-port> <mac> Removes the static MAC OUI
delete
disable <slot-port>
enable <slot-port>
mode <slot-port>
<accept|deny>
<slot-port> <mac> Creates a MAC OUI filter.
set
show <slot>|<slot-
port>
set <slot-port>
<type>
show <slot>
clearinfo <vid>
enable <vid>
delete <vid>
disable <vid>
DESCRIPTION
Turns on the MAC filter on the
specified subscriber ports.
Sets the MAC filter actions.
entry.
Displays MAC filter settings.
MAC OUI (Organization Unit
Identifier) filter allows or drops
packets with MAC addresses from
specific vendors.
filter.
<mac>
= first three octets of the
MAC address.
Deactivates MAC OUI filtering on
this port.
Activates MAC OUI filtering on this
port.
Sets the filter action.
<mac> = first three octets of the
MAC address.
Displays MAC OUI filter settings
for the specified port or slot.
Packet type filter allows or drops
specified packet types on the
specified subscriber ports.
Sets the packet type filter for the
specified subscriber ports.
<type> = accept-all, pppoe-only,
or any combination of ip, arp,
dhcp, eapol, pppoe, netbios, igmp
separated by a space.
Displays packet type filter settings. L
Resets PPPoE line description for
the VLAN.
Enables PPPoE line information
for the VLAN. The switch adds the
line information to PPPoE packets
for identification and security.
Deletes PPPoE line information
settings for a VLAN.
Deactivate PPPoE line information
insertion for a VLAN.
Chapter 17 acl Commands
P
M
M
M
L
M
M
M
M
M
L
M
M
M
M
M