Figure 17 VLAN Setup Example
9 Use the following steps to set the VPI and VCI and PVID (default VLAN ID) settings for
all of a line card's DSL ports.
First you will delete the default PVC from all of the line card's DSL ports. Then you will
configure a new PVC for a port and copy it to the line card's other DSL ports.
10Under Port, click PVC.
Figure 18 Port Setup Menu
11Click a line card's slot number to display PVC settings for all DSL ports on the selected
line card.
Chapter 4 Initial Setup Example
MSC1000G User's Guide
69