Sorter Installation - Ricoh FT5034C Service Manual

2. SORTER INSTALLATION

2.1 ACCESSORY CHECK
1. Sorter Adapter .......................................... 1
2. Mount Stay................................................ 1
3. Hinge Bracket: Front................................. 1
4. Hinge Bracket: Rear ................................. 1
5. Mounting Stud Screw................................ 2
6. Screw M4 x 25 .......................................... 2
7. Screw M4 x 6 ............................................ 2
8. Cable Clamp 5N ....................................... 1
9. Tapping Screw M4 x 10 ............................ 2
10. Tapping Screw M4 x 6 .............................. 5
2.2 INSTALLATION PROCEDURE
1. Turn off the main switch and unplug the
power supply cord of the copier.
2. Remove the rear cover [A] of the copier (4
screws).
3. Remove the four plastic caps [B] from the
left cover.
4. Remove the two screws [C] from the top
cover.
5. Cut off the cap [D] on the rear cover with
cutting pliers.
6. Screw in the two mounting stud screws [E].
7. Screw two M4 x 6 screws halfway into the
mounting studs.
- 3 -