Report-Aggregation (Igmp-Snooping View); Reset Igmp-Snooping Group - HP 5900 Series Command Reference Manual

[Sysname-igmp-snooping] overflow-replace vlan 2
Related c ommands
igmp-snooping overflow-replace

report-aggregation (IGMP-snooping view)

Use report-aggregation to enable IGMP report suppression.
Use undo report-aggregation to disable IGMP report suppression.
Syntax
report-aggregation
undo report-aggregation
Default
IGMP report suppression is enabled.
Views
IGMP-snooping v
Predefine d user roles
ne twork-admin
Examples
# Disable IGMP report sup
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] undo repor

reset igmp-snooping group

Use reset igmp-snooping group to remove the dynamic IGMP snooping forwarding entries for multicast
groups.
Syntax
reset igmp-snooping group { group-address [ source-address ] | all } [ vlan vlan-id ]
Views
User view
Predefine d user roles
netw ork-admin
Paramete rs
group-address: Spec
239.255.255.255.
source-address: Specifies a multicast source by its IP address. If you do not specify a multicast so
command removes the dynamic IG
all: Specifies all multicast groups.
iew
pression.
ifies a multicast group by its IP address in the range of 224.0.1.0 to
MP snooping forwarding entries for all multicast sources.
t-aggregation
41
urce, the