display interface fc
Use display interface fc to display FC interface information.
Syntax
display interface [ fc ] [ brief [ down ] ]
display interface [ fc [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies an FC interface by its number.
brief: Displays brief information about interfaces. If you do not specify this keyword, the command
displays detailed information about interfaces.
description: Displays complete interface descriptions.
down: Displays information about the interfaces in physically down state and the causes. If you do not
specify this keyword, the command displays information about interfaces in all states.
Usage guidelines
If you do not specify the fc interface-number option, this command displays information about all
interfaces supported by the device.
If you specify the fc keyword but not the interface-number argument, this command displays information
about all FC interfaces.
Examples
# Display detailed information about interface FC 1/0/1.
<Sysname> display interface fc 1/0/1
Fc1/0/1
Current state: UP
Line protocol state: UP
Description: Fc1/0/1 Interface
Bandwidth: 4000000kbps
Maximum Transmit Unit: 2112
4000Mbps-speed mode
Internet protocol processing: disabled
Link layer protocol is FC
Fill word is idle-idle
Port WWN is 66:66:66:62:65:34:30:39
FC mode is Auto, state is E
Transmit B2B Credit is 64
Receive B2B Credit is 64
Support the VSAN protocol
VSAN tagging mode is Non tagging
5