Display Mld Interface - HP 5900 Series Command Reference Manual

Figure 2 Command output
Field
Entries in total
(*, FF03::101)
(2001::101, FF3E::202)
Interface
Expires
Related commands
reset mld group

display mld interface

Use display mld interface to display MLD information for an interface.
Syntax
display mld [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays MLD information for
interfaces on the public network.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, the command displays MLD information for all MLD-enabled interfaces.
verbose: Displays detailed MLD information.
Examples
# Display detailed MLD information for VLAN-interface 1 on the public network.
<Sysname> display mld interface vlan-interface 1 verbose
Vlan-interface1(FE80::200:AFF:FE01:101):
MLD is enabled.
MLD version: 1
Query interval for MLD: 125s
Other querier present time for MLD: 255s
Maximum query response time for MLD: 10s
Last listener query interval: 1s
Last listener query count: 2
Startup query interval: 31s
Description
Total number of IPv6 multicast groups.
(*, G) entry.
(S, G) entry.
Interface name.
Remaining time for the IPv6 multicast group.
The timer is disabled, and this field displays Never.
276