Log In / Change Access Level; Logging Out From An Access Level - Siemens FC7xx Operation Manual

Operation
5

Log in / Change access level

5.5 Log in / Change access level

5.6 Logging out from an access level

58 | 184
Building Technologies
Fire Safety
You can enable an 'Access level' by entering your PIN in the PIN entry dialog, or by
pressing <ok>. Alternatively you can use the key switch (optional) to release an
Access level.
If you press a key on the ↑ Person Machine Interface whose function requires a
higher 'Access level', the PIN input dialog is displayed automatically.
Login/logout
Enter PIN:
Logout or guest-login: no PIN + <ok>
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>
Table 1: PIN entry dialog box
Enabling an 'Access level' without a PIN
1. Press <Menu> on the keypad.
 The PIN input dialog is indicated.
2. Do not enter a PIN and confirm with <ok>.
 The lowest 'Access level' is enabled.
 The main menu is open.
Enabling an 'Access level' with a PIN
1. Press <Menu> on the keypad or select the 'Main menu' > 'Login/logout'' main
menu item.
 The PIN input dialog is indicated.
2. Enter your PIN and confirm with <ok>.
 The corresponding 'Access level' is enabled.
 The main menu is open.
The present 'Access level' is indicated in the main menu in the header of the
display.
1. Select 'Main menu' > 'Login/logout'.
 The PIN input dialog is indicated.
2. Do not enter a PIN and confirm with <ok>.
 The 'Access level' is reset back to the lowest 'Access level'.
****
A6V10211076_i_en_--
2015-12-15