Changing The Status Screens - Siemens SINAMICS IOP-2 Operating Instructions Manual

Installation

5.3 Changing the Status screens

Display backlight
To change the intensity of the backlight, the following actions should be performed:
Select Menu
Select Display backlight
The display backlight setting will be automatically changed to the "Low" setting after 60
seconds from the last key press to extend the life of the display. When any key is pressed the
backlight setting will automatically return to the user setting.
5.3 Changing the Status screens
Changing the status screens
The status screens of the IOP-2 can show three different styles of screens.
• Bar graph view - This shows the selected data on up to two separate sliding bar scales.
• Scalar view - This shows the selected data as numerical values in up to four separate
quadrants on the screen.
• Trend view - This shows the selected data as two separate real-time plots on the screen.
22
Select Extras
Select display backlight level
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
Select Panel settings
Press and hold down ESC for
Status Screen
Intelligent Operating Panel 2 (IOP-2)