Table of Contents
Advertisement
6.3.3 Start Automatic Sailing of TCS Route
1) In the normal menu
Select [MENU] - [(3) AUTO Sail] - [(1) Start] in that order.
Then, the "Select WPT" panel opens.
To fix setting, click [OK].
If the following warning is displayed, confirm whether to have selected TCS route.
If the following warning is displayed, check the Limit and Safety check by Route Planning.
2) Left-click the [OK] to close the panel.
Then, the "Confirmation" panel will appear.
Click the [OK] if confirming that there is not a problem in the setting.
When there is a problem in the setting and close the "Confirmation" panel, click the [Cancel].
6 Automatic Sailing
If you want to cancel the operation and close the dialog,
click [Cancel].
6-10
Displays the [Route] file
selecting on the display panel.
Choose "To Waypoint" number
displaying alternative which
was set in the [Route] file.
Please do not change the
setting as follows:
Pre Run Speed
Pre Run Time
Enter Angle
Turn Radius
Pre Run Distance
XTD MAX
Advertisement
Table of Contents
