Table of Contents
Advertisement
(2) Button functions
4 Route Planning
Left-click to close the route file and exit the Table Editing mode.
Left-click when making a new route file.
Left-click to select a route file previously made.
Left-click when saving the route file currently made.
Left-click when printing the WPT contents. (Only when connected to a printer)
Left-click when inserting a new WPT.
Left-click when deleting a WPT.
Left-click to divide the leg.
Left-click to set default value on following columns.
PORT/STBD/ARR RAD/ SPD/Sail/Turn RAD/Time Zone.
Left-click when checking the safety of the route. As a result of the checking,
warning dialog box will appear if the route is not safety.
Left-click to check if the route exceeds the limit (leg length, etc.).
This button is available for TCS mode only.
Left-click when you want to display the WPT during editing.
Left-click the drop-down list button to left-click one of the items. The Name
column contents in the editing table change according to the selected item.
Name :
WPT to WPT :
displayed.
Total :
It shifts to Graphic Editor.
When editing a route, the editing can be continued on Graphic Editor.
4-12
You can enter name in the Name column.
WPT
to
WPT
W000 to WPTn information is displayed.
information
is
Advertisement
Table of Contents
