Table of Contents
Advertisement
5.5.2 Entering Objects
See the current cursor position displayed at the bottom when entering objects.
(1) How to enter symbols
Putting symbols:
1) Select one of the objects on the symbol selection panel.
• Be sure that the "cursor" column is displayed "Make Map".
2) Rotate the trackball to move the cursor, and left-click at the position you want to put the symbol.
Each time you left-click the cursor, the symbol is added on the chart.
3) To abort, right-click the trackball and select [Abort] from the pop-up menu. Then, the "cursor"
column is displayed nothing.
Deleting symbols [Delete]:
1) Left-click the [Delete] button.
• Be sure that the "cursor" column is displayed "Delete Map".
2) Left-click the symbol you want to delete.
3) To abort, right-click the trackball and select [Abort] from the pop-up menu. Then, the "cursor"
column is displayed nothing.
Moving symbols [Move]:
1) Left-click the [Move] button,
• Be sure that the "cursor" column is displayed "Move Map".
2) Left-click the symbol you want to move.
3) Left-click the cursor at the position you want. Then, the symbol is moved to the new position.
4) To abort, right-click the trackball and select [Abort] from the pop-up menu. Then, the "cursor"
column is displayed nothing.
(When you left-click the cursor.)
First entry
Edit
5-27
Second entry
Last entry
Selected symbol
(When you left-click the cursor.)
ECDIS
5 Chart Editing
Advertisement
Table of Contents
