3.3.4 Power OFF Operation
On the operation panel
Press the [POWER] key.
The power is turned off and the [POWER] key light goes out.
[POWER] key
When OFF: Unlit
Note:
• If the [POWER] key is pressed during Navigation & Planning, gray screen will be displayed about
20 seconds, but the power will eventually be turn off.
3.3.5
Adjusting the Brightness and Sound Volume
Perform the following adjustments as required.
(1) Brightness of the screen ([BRILL])
Adjust the Brilliance control on the LCD monitor to adjust the brightness on the screen.
• JAN-701B
Brilliance control
3 Basic Operation of ECDIS
• JAN-901B
Brilliance control
3-24