Table of Contents
Advertisement
3.15.3
Operating EBL/VRM Using the Display panel
On the display panel, you can operate and display value of EBL and VRM from "Tools" panel.
Azimuth of EBL button
T: True North mode
R: Bearing Reference mode
EBL1/EBL2 edit button
Active: Displaying EBL line and having the right to operate by EBL dial.
Inactive: Displaying "OFF"
VRM1/VRM2 edit button
Active: Displaying VRM line and having the right to operate by VRM dial.
Inactive: Displaying "OFF"
3 Basic Operation of ECDIS
Units of distance button
When left-click, units of VRM distance is changed.
[NM] -> [km] -> [sm] -> [NM] -> ...
switching"Tools""Brilliance"
Displaying position of cross point
on EBL1 and VRM1
Displaying position of cross point
on EBL2 and VRM2
Base point button
Active/Inactive of EBL1/EBL2 button
Active: Displaying EBL line on chart display area
and displaying EBL azimuth
Inactive: Displaying "OFF"
Active/Inactive of VRM1/VRM2 button
Active: Displaying VRM line on chart display area
and displaying VRM distance
Inactive: Displaying "OFF"
3-110
[Blank]: CCRP
D: Dropped point
Advertisement
Table of Contents
