Terminating The Automatic Sailing - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

3) Left-click the [OK] to close the panel.

If there is no problem in the setting, the "Confirmation" panel will appear.

Click the [OK] if confirming that there is not a problem in the setting.

When there is a problem in the setting and close the "Confirmation" panel, click the [Cancel].

4) Left-click the [OK] to continue automatic sailing procedure.

Then, the automatic sailing starts and route monitoring is carried out by the system.

During automatic sailing, you should turn the ship with the [TURN] key as follows:

When "Actual Course Change" alarm is occurred 30 seconds before arrived at WOL.

Press the [TURN] key on the operation panel.

Then, the ship will start to turn.

During automatic sailing, the following menu changes invalidly.

[Menu] - [(9)Exit]

[Menu] - [(3)AUTO Sail] – [(1)Start]

By terminating automatic sailing, it returns in the validity.

6.3.4 Terminating the Automatic Sailing

1) In the normal menu

Select [MENU] - [(3) AUTO Sail] - [(2) Stop] in that order.

Then, the "Confirmation" panel will appear.

2) Left-click the [OK] to stop the automatic sailing.

When [Cancel] is clicked, Auto Sail is continued.

6 Automatic Sailing