Target Track - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

3.3.9.3 Target Track

Maximum of 20 Target Track are displayed. When more than 20, it is erased from old Target Track.

Even if it changes [Target Memory Interval], the point which was displayed by the first setting is

displayed just as it is

When setting [Target Memory Interval] in the distance interval, it is displayed when moving the

distance that a movement except the straight line was specified.

1) In the normal menu

Select [MENU] - [(1) AIS/TT]-[(8) Target Track]-[(1) Target Track Setting] in that order..

In the Table Editing menu, Graphic Editing menu, User Chart Editing menu

Select [MENU]-[(3) AIS/TT]-[(8) Target Track]-[(1) Target Track Setting] in that order. [Target

Track Setting] panel is displayed.

Target Track can be displayed in a maximum of 20.

Check ON→Target Track is displayed.

Check OFF→Target Track is not displayed.

[OFF] Target Track is not cleared.

[All] : Clear all.

[Target Track No. xx] : Clear Target Track of selected number.

[Other] : Clear to No11 from No20.

3 Basic Operation of ECDIS

[Target Track Color & Display] panel is

Target Track is displayed every [3sec] [5sec]

[10sec] [30sec] [1min] [3min] [5mim] [10min]

[30min] [60min] [1NM] [3NM] [5NM] [10NM].

[OFF] : Target Track is not cleared.

[All] : Clear all.

[(Color)] : Clear Target Track of selected color.