Table of Contents
Advertisement
7.7 Setting the User Key
Register [Option1], [Option2] and [USER] key functions.
1) In the normal menu
Select [MENU] - [(7) Main] - [(0) Setting] - [(2) Option Key Setting] in that order.
The [Option Key] dialog box will be displayed.
2) Left-click in the function display box. The selectable functions will be listed.
Left-click the function that is to be assigned to the user key.
3) Left-click the [OK] button to close the dialog box.
Selectable functions list:
Function name
Graphic Editor...
Chart Editor...
Chart Setting...
Ownship/Track Setting...
Save My Port List...
My Port List
Change Active Panel (ARCS only)
Load Low Resolution(ARCS only)
Logbook
Print Display...
Save Screen
Save Chart Setting
Chart Setting List
Display Base Temporarily
(S-57/C-MAP only)
7 Tools and Setting/Serviceman Menu
Starts up Graphic Editor of Route Planning.
Exit from Graphic Editor when pushing allocated user key
again.
Starts up User Map Editor.
Exit User Map Editor when pushing allocated user key
again.
[Chart Setting] panel opens.
[Own Ship Setting] panel opens.
[Save my Port List] panel opens.
[My Port List] panel opens.
Boundary of the chart is displayed.
Changes to low resolution.
[Logbook] panel opens.
[Print] panel opens.
Saves a screen.
[Save Chart Setting] panel opens.
[Chart Setting List] panel opens.
Changes SENC information level to "Base" temporarily.
Returns to previous level when pushing allocated user
key again.
Also, returns to previous level when moving a cursor to
menu bar or display panel and so on, too.
7-12
Function
Advertisement
Table of Contents
