Table of Contents
Advertisement
3.15.2.5
Dropped EBL/VRM – Move Origin1 (Move Origin2)
The following description is an operation to move Origin1 (the base point of EBL1/VRM1).
Moving Origin2 (the base point of EBL2/VRM2) becomes a similar operation.
1) Right-Click on the chart and select [Dropped EBL/VRM] - [Move Origin1] from context menu.
Then, EBL1 and VRM1 are displayed and its base point is displayed on the cursor.
2) Move the cursor and left-click at the position you want. Then, the base point is fixed.
3.15.2.6 CCRP EBL/VRM – EBL1/VRM1 (EBL2/VRM2)
The following description is an operation to draw EBL1/VRM1. Drawing EBL2/VRM2 becomes a
similar operation.
(1) 1-Step Operation
1) Right-Click on the chart and select [CCRP EBL/VRM] - [EBL1/VRM1] from context menu.
Then, EBL1 and VRM1 are displayed and there base point is displayed on the ship.
At the same time, the cross point on EBL1 and VRM1 is displayed on the cursor.
2) Move the cursor and left-click at the position of cross point you want. Then, the cross point is fixed
along with EBL1 bearing and VRM1 distance.
Select
[CCRP EBL/VRM] -
[EBL1/VRM1]
3 Basic Operation of ECDIS
Left-Click
3-108
Advertisement
Table of Contents
