Table of Contents
Advertisement
3.4.2 Shifting the Chart with the Cross Cursor
You can shift the chart using the cross cursor by simply left-clicking at any position on the chart. Then,
the position becomes the center of the chart.
For the detailed explanation of Motion mode, see 3.7 "Selecting Motion/Azimuth Mode".
True Motion:
1) Rotate the trackball and move the cross cursor to the position you want to set it at the center of
the chart.
2) Left-click at that position.
Relative Motion:
You can shift the location of ship display within the chart view.
1) Rotate the trackball and move the cross cursor to the location you want to set it the ship display.
2) Left-click at that position.
Cross cursor intersecting point
[Moving to the Center of the Screen]
[Moving the location of ship display]
3-57
3 Basic Operation of ECDIS
ECDIS
Advertisement
Table of Contents
