Table of Contents
Advertisement
3) Left-click the [Set Alarm Limit] , the "Alarm Limit Option" panel opens.
4) Left-click the [Vector] and [Sector] and enter the value
•
Vector: It left-clicks a Dangerous Detection Vector [length] and [width] colum and it
enters a value.
•
Sector: It left-clicks a Dangerous Detection Vector [radius] and [width] colum and it
enters a value.
5) Left-click the [OK] on the "Alarm Limit Setting" panel, and then the [OK] on the "Own Ship
Setting" panel to close all panels,setting becomes valid.
3 Basic Operation of ECDIS
Vector:
Turns ON/OFF to affect danger detection
vector.
Length:
Set 0.1 to 5.0 NM or set 1.0 to 30.0 min
NM / min:
Change to unit of Length.
NM: distance from ship
min: time until arriving
Width:
Set 30.0 to 250.0m.
Sector:
Turns ON/OFF to affect danger detection
sector.
NM / min :
Change to unit of Radius.
NM: distance from ship
min: time until arriving
Radius:
Set 0.1 to 5.0 NM or set 1.0 to 30.0 min
Width:
Set 0.0 to 359.9deg.
3-156
Advertisement
Table of Contents
