Table of Contents
Advertisement
● Precautions Upon Equipment Operation ●
Never remove the cover of this equipment.
Touching the high-voltage section inside will cause an electric shock.
Do not attempt to disassemble or tamper with this equipment.
Otherwise, a fire, an electric shock, or a malfunction may occur.
Do not place a glass or cup containing water, etc., or a small metal object on
this equipment.
If water or such object gets inside, a fire, an electric shock, or a malfunction
may occur.
In case water or a metal object gets inside the equipment, turn off the power
immediately, unplug the power supply cable from an electric outlet, and contact
our head office, or a nearby branch or local office to request servicing.
Keeping the equipment in operation under such condition may cause a fire, an
electric shock or a malfunction.
In case you find smoke, strange smell or unusual heat coming from the
equipment, turn off the power immediately, unplug the power supply cable from
an electric outlet, and contact our head office, or a nearby branch or local office
to request servicing.
Keeping the equipment in operation under such condition may cause a fire or
an electric shock.
Do not use the offset function during navigation.
If the equipment is used with the offset value entered as the own ship position,
the position of your ship displayed on the screen is shifted from the real one,
and accidents may result.
When the offset values are entered, the background color of the position panel
on the display panel is colored in sky blue, and the message "Position Shift" is
displayed in the message display area. Check these indications, and cancel the
offset function if necessary.
vii
Advertisement
Table of Contents
