Table of Contents
Advertisement
3) Left-click one of the S-57 updating charts in the table.
If you want to display and check the updating objects, select chart to left-click the [Show].
Then, the S-57 updating chart will be displayed on the chart.
The objects of the updating chart will be superimposed on the original chart and show in red.
Updating objects will be
displayed in red.
4) Left-click the [OK] .
The panel closes and the updating objects are merged with the original chart.
3 Basic Operation of ECDIS
Accept updating objects
by left-clicking the [OK]
on the "Accept
Updates"panel.
The updating objects are merged
with the original chart and its color is
changed from red to normal one.
3-182
Advertisement
Table of Contents
