Danger Detection Vector And ...Sector - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

3.27.3 Danger Detection Vector and ...Sector

You can set the danger detection vector and sector for your safety. The danger detection vector can be

set the monitoring area of the cross line of the safety contour and the danger area etc. While, the

sector can be set to monitor dangerous objects around your ship. The danger detection vector is

shown in the rectangular shape and the tip of the vector is the expected time assuming that the ship sails

at the current speed. The sector and its radius can be set as required.

Danger Detection Sector angle

(0.0deg to 359.9deg)

[Danger Detection Vector and Sector]

1) In the normal menu

Select [MENU] - [(4) Ownship/Track] - [(0) Setting] in that order.

The "Own Ship Setting" panel is displayed.

2) Left-click each item on the "Danger Detection" panel.

Danger Detection Sector radius

(1.0min to 30.0min

or 0.1NM to 5.0NM)

Danger Detection Vector width

(30m to 250m)

Danger Detection Vector length

(1.0min to 30.0min

or 0.1NM to 5.0NM)

Danger detection vector display ON/OFF

Danger detection sector display ON/OFF

[When left-clicking,the[Alarm Limit Setting]

panel opens].

3 Basic Operation of ECDIS