Selecting Chart From All (Arcs Only) - JRC JAN-701B Instruction Manual

3.10.3 Selecting Chart from All (ARCS Only)

You can select a chart from all the charts loaded in the hard disk.
1) Left-clicking [Select Chart] button on the display panel.
The "Select Chart" panel opens.
2) Left-click the chart No. you want, and then left-click the [OK].
The panel closes and the selected chart is displayed on the screen.
• If Preview is turned on, a low resolution chart of the temporarily chosen chart will be displayed.
You can open the "Select Chart" panel by left-clicking [Select Chart] on the
display panel.
3 Basic Operation of ECDIS 3-76