3.2.2 Flowchart for Sailing
Sailing start
Select [Route]
Select [To WPT]
Move you ship to the sea
Bearing to the To WPT
Next Page
About Auto Sailing:
You can use automatic sailing when using together with the Auto Pilot equipment. For details, see
chapter 6 "Automatic Sailing".
3 Basic Operation of ECDIS
Alarms:
If an alarm occurs, the alarm panel will blink in red and a sound will be
heard. Check the alarm contents and, after confirming it, press the
[ALARM ACK] key on the operation panel. Pressing the [Alarm List] on the
display panel shows the alarm contents. (For detailed description, see
3.3.7 "How to Release the Alarm ([ALARM ACK])".)
• Select the [Route] you want from the display panel. (Initially "UNLOAD" is
shown.)
• Select the [To WPT] (for example "1" or "Auto Select").
• Move your ship manually. Your ship will always be displayed on the chart.
Ship's bearing
Note:
•Be sure that the background color is not sky
blue. If it is sky blue, your ship position is
shifted by the offset function. In this case,
return its color to gray. See, 3.34.4 "Canceling
the Ship Offset".
3-18
To WPT
Your ship's symbol