Table of Contents
Advertisement
7.5.3 Speed Setting
1) In the normal menu
Select [MENU] - [(7) Main] - [(4) Sensor] in that order.
The "Sensor Connection" panel opens.
a) Use LAN / Use Local Port
Select the log sensor. Log sensor's information is used to determine the speed of the ship.
• Use LAN: This item selects when input a data from LAN Board.
• Use Local Port: This item selects when input a data from Local Port.
• GYRO I/F: GYRO I/F out put type log is used for the ship speed sensor.
• NMEA LOG: NMEA LOG out put type log is used for the ship sensor.
• GYRO(NMEA): GYRO(NMEA) out put type log is used for the ship sensor.
When setting to [Use LAN] or [Use Local Port], it is displayed with "STW(LOG)" in the display
panel.
b) Manual (not used usually)
Enter the value when you apply any value as the speed of the ship.
The maximum speed that can be set is 99.9 kn.
When setting to [Manual], it is displayed with "STW(MAN)" in the display panel.
7.5.4 Date Data Source Setting
1) In the normal menu
Select [MENU] - [(7) Main] - [(4) Sensor] in that order.
The "Sensor Connection" panel opens.
2) Left-click the item to select it, and enter the value to the value entry box.
• GPS1:
No.1-GPS or No.1-DGPS is used as the data source of date/time setting.
• GPS2:
No.2-GPS or No.2-DGPS is used as the data source of date/time setting.
• MANUAL: Date/time setting is made manually.
Selects a ship speed sensor
LAN : GYRO I/F, NMEA LOG,
Local Port : GYRO I/F, GYRO(NMEA)
Date/time setting data (GPS1, GPS2, MANUAL)
7-9
7 Tools and Setting/Serviceman Menu
ECDIS
Advertisement
Table of Contents
