Making A New Route File (Graphic Editing) - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

4.1.3.4 Making a New Route File (Graphic Editing)

This explanation is made according to (1) "Making a new route file (Graphic Editor)" in 4.1.3.3 "Operation

Flowchart for Graphic Editor (Graphic Editing)".

(1) Unloading the selected route before starting

Before starting, left-click the ROUTE drop-down button on the

display panel, and then left-click the [UNLOAD] to clear any

route on the screen.

(2) Entering the Graphic Editing mode

1) In the normal menu

Select [MENU] - [(2) Route] - [(1) Route Planning] - [(2) Graphic Editor] in that order.

• When you open the Graphic Editing menu, rotate the trackball to move the cursor on upper part

Then, the Graphic Editing menu title bar opens. To close it, left-click any position on the chart.

[Graphic Editing Menu]

(3) Opening a new route file

1) To make a new route file, left-click the [New] button.

In the Graphic Editing menu

Select [MENU] - [(1) File] - [(1) New] in that order.

How to save the route:

The route file saving operation is exactly the same as for Table Editor.

See (5) "Saving the route file" in 4.1.2.4 "Making a New Route File (Table Editor)".

4 Route Planning