Own Ship's Parameter Setting - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

7.15 Own ship's Parameter Setting

Input the parameter accurately according to the specification of the ship.

Otherwise, accidents may result.

After changing the setting, execute to exit "Navigation & Planning".

Otherwise, accidents may result because ECDIS is not affected by the set

7.15.1 Ship's Parameter

This function sets the parameter of a ship necessary for operating ECDIS.

1) In the normal menu

After "Serviceman" menu is displayed by "Code Input" panel,

Select [(1) Serviceman]-[(4) Ship's Parameter] in that order.

The [Ship's Parameter] dialog box will be displayed.

2) Input an accurate value to each parameter column.

3) After inputting all the parameter, push the OK button. Then, Information message is displayed.

4) Exit to "Navigation & Planning" and start again

7 Tools and Setting/Serviceman Menu