Code Input - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

7.13 Code Input

By inputting a regulated code on "Code Input" panel, the enhanced menu is displayed. As other functions,

"Navigation and Planning" can be ended.

1) In the normal menu

Select [(7) Main] - [(5) Code Input] in that order.

The [Code Input] dialog box will be displayed.

2) Input the regulated code to the input column, and push [OK] button. Then, "Code Input" panel is

closed, and operation corresponding to a regulated code is done. When inputting the

deregulated code, "Code Input" panel is closed with nothing done.

* A typing in character is displayed with "*"

Regulated code and the operation

"Serviceman" menu (for engineer) is displayed on Menu Title Bar.

(Original menu is disappeared on this operation. To display original menu, select

[Serviceman]-[Exit Serviceman Menu].)

* Please do not operate the serviceman menu excluding JRC serviceman.

The device might not work correctly when the setting is changed.

3) To close "Code Input" panel, select "Cancel" button.

7 Tools and Setting/Serviceman Menu