11.2 Configuration for Each Graph
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(0) Setup...] in that order, and the "Setup" panel will be
displayed. Press a tab written the name of the block will change each display block setting.
Engineer can only set each data display On/Off by entering Password in Maintenance window.
These buttons are common buttons of the "Setup" panel.
[Exit] button:
[OK] button:
[Cancel] button: Cancel change setting and close "Setup" panel.
11 Operation of Multi Window
Exit the Conning Display and display Startup screen.
Accept settings and close "Setup" panel.
Click tab of setting block
11-4