Editing A Previous Route File (Table Editor) - JRC JAN-701B Instruction Manual

4.1.2.5 Editing a Previous Route File (Table Editor)

This explanation is made according to (2) "Editing the route file (Table Editor)" in 4.1.2.3 "Operation
Flowchart for Table Editor".
(1) Unloading the selected route before starting
Before starting, left-click the ROUTE drop-down button on the
display panel, and then left-click the [UNLOAD] to clear any
route on the screen.
• You can also unload the selected route by the following menu operation.
(2) Entering the Table Editing mode
1) On the operation panel
Press the [ROUTE PLAN] key.
In the normal menu
Select [MENU] - [(2) Route] - [(1) Route Planning] - [(1) Table Editor] in that order.
- When you open the Table Editing menu, rotate the trackball to move the cursor on upper part of
screen.
Then, the Table Editing menu title bar opens. To close it, left-click any position on the chart.
(3) Selecting the route file
1) To select the route file, left-click the [Open] button.
In the Table Editing menu
Select [MENU] - [(1) File] - [(2) Open] in that order.
The "Open Route File" panel opens.
2) Select a route file you want to edit, and left-click the [OK] button.
Then, the selected file opens on the screen.
Now you can edit the file in the same way as when you make a new route file.
4 Route Planning
[Table Editing Menu]
4-28