Table of Contents
Advertisement
(6) How to enter text (small/large font)
1) Select Small font or Large font on the text selection panel.
•Be sure that the "cursor" column is displayed "Make Map".
2) Move the cursor and left-click at the position you want to enter the text.
Then, the "Location/Attributes" panel opens. You can specify the location and select attributes
by using this panel.
(When you select Small Font)
["Location/Attributes" panel for text]
• You can edit the latitude and longitude of each object by entering position latitude and
longitude.
• You can edit the rotational angle of the text.
• You can set Min Scale and Max Scale that limit the display of this object.
• You can change the color (8 colors) and font size (6 to 72 points).
• You can enter the text that will be displayed on the chart and comment.
3) Left-click on the [OK] button to close the panel.
The settings made in the "Location/Attributes" panel will be applied.
Repeat above steps to enter text at desired locations.
5 Chart Editing
(When you select Large Font)
5-38
Advertisement
Table of Contents
