Table of Contents
Advertisement
3.15.2.2
Dropped EBL/VRM – EBL1/VRM1 (EBL2/VRM2)
The following description is an operation to draw EBL1/VRM1. Drawing EBL2/VRM2 becomes a
similar operation.
(1) 1-Step Operation
1) Right-Click on the chart and select [Dropped EBL/VRM] - [EBL1/VRM1] from context menu.
Then, EBL1 is displayed and its base point is displayed on the cursor.
2) Move the cursor and left-click at the position you want. Then, the base point is fixed.
At the same time, VRM1 is displayed with EBl1, and the cross point on EBL1 and VRM1 is
displayed on the cursor.
3) Move the cursor and left-click at the position of cross point you want. Then, the cross point is fixed
along with EBL1 bearing and VRM1 distance.
Select
[Dropped EBL/VRM]
- [EBL1/VRM1]
3 Basic Operation of ECDIS
Left-Click
3-106
Left-Click
Advertisement
Table of Contents
