Table of Contents
Advertisement
c) Layer (S-57/C-MAP only)
Layers displayed on the chart are listed below. There are [-] layer, [S] layer, and [O] layer.
[-]: Items that can be set when the chart object display is in [Base], [Standard], and [Other]
mode
[S]: Items that can be set when the chart object display is in [Standard] or [Other] mode.
[O]: Items that can be set when the chart object display is in [Other] mode.
(For chart object display, see 3.6 "Changing the Object Category (S-57/C-MAP only)."
Display of each layer listed below can be turned ON/OFF:
Layers in S-57/C-MAP Ed.2
[S] objects:
• unknown object
• Land region, Sea area/named water area
• Causeway, Dam, Dyke, Gate
• Dyke, Slope topline, Airport, Building, single, Crane, Landmark, Built-up area
• Swept area
• Sand wave, Tunnel, Cable, Submarine
• Navigation line
• Recommended track
• Ferry route
• Radar range, Radar line
• Restricted area
• Ferry route, Military practice area, Offshore production area
• Caution area, Fairway
• Fishing ground, Marine farm/culture
• Anchorage area, Anchor berth
• Cable area, Pipeline area
• Dumping ground, Cargo transshipment area, Incineration area
• Daymark
• Navigational system mark
• topmarks
• light
• Fog signal, Retro-reflector, Radar transponder beacon, Radar reflector
• Pilot boarding place, Signal station, Traffic, Signal station, Warning
[O] objects:
• Quality of data,Low accuracy data
• Nautical publication information
• Coverage, Compilation scale of data
• Local magnetic anomaly, Magnetic variation
• Sloping ground, Land elevation, Slope topline
• Vegetation, Lake, Rapids, River, Water fall, Tideway
• Building, Fortified structure, Land mark, Silo/Tank, Airport, Road, Railway
• Check point, Harbour facility
• Distance mark
3 Basic Operation of ECDIS
3-172
Advertisement
Table of Contents
