Logbook Setting - JRC JAN-701B Instruction Manual

3.26.2 Logbook Setting

You can filter the trigger conditions to record the log data in the logbook. Also, you can filter the trigger
conditions to save the log data which will only be used to display in the "Logbook" panel explained in
3.26.1 "Displaying the Logbook".
1) In the normal menu
Select [MENU] - [(7) Main] - [(0) Setting] - [(5) Logbook Setting] in that order.
The "Logbook Setting" panel opens.
2) Left-click the option items you want to select in the "Logging" and "View" panels, and left-click
the [OK] .
Note:
• Some of the items of Logbook may not be available depending on the hardware and system
configuration used.
Log data is automatically saved according to the settings on the "Logging" area.
Also, log data will be saved for displaying in the "Logbook" panel,
For example, if you left-click and select "At Noon". The log data is saved "At noon".
Contents of the logbook items are as follows:
• At Noon:
Data will be saved at
12:00 (LTM) when this
item is valid.
• Every X minutes:
Data will be saved after
set duration of time.
• Route Alarm:
Data will be saved
when an alarm related
to "Route Monitoring
Alarm".
• Chart Alarm:
Data will be saved
when an alarm related
to "Safety counter
Alarm" "Dangerous
Alarm " "LAT.Limit Over
Alarm" "Chart Alarm"
"Area Alarm",
• Navtex:
Data will be saved when data from Navtex are received.
• When press
Data will be saved when the [Event] button is held down.
• AUTO Sail/Sensors:
Data will be saved when an alarm related to "Alarm System States" tab.
3 Basic Operation of ECDIS
:
3-150