Table of Contents
Advertisement
3.3.9 The AIS/TT target Display
You can turn ON/OFF the AIS/TT target information on the chart using the operation panel or from the
menu.
Note:
• TT information is displayed only when it is received from the TT device system.
• AIS information can be displayed only when it is received from the AIS device system.
• For AIS/TT target settings, (see 3.33 .1"AIS/TT Setting").
3.3.9.1 AIS/TT display ON/OFF
(1) AIS/TT display ON/OFF using the operation panel
On the operation panel
Press the [AIS/TT] key.
The target information sent from the radar currently selected will be superimposed on the chart.
(2) AIS/TT display ON/OFF from the menu
"TT 1" "TT 2" "AIS" can be independently selected. Selecting [All] can turns ON/OFF "TT 1" "TT 2"
"AIS" displays at the same time.
In the normal menu
Select [MENU]-[(1) AIS/TT ]-[(1) TT1] or [(2) TT2] or [(3) AIS] or [(4) All] in that order..
In the Table Editing menu, Graphic Editing menu, User Chart Editing menu
Select [MENU]-[(3) AIS/TT ]-[(1) TT1] or [(2) TT2] or [(3) AIS] or [(4) All] in that order..
Each time you select [(1) TT1], [(2) TT2], or [(3) AIS], its display is turned ON and OFF.
When you select [(4) All], items [(1) TT1] [(2) TT2] [(3) AIS] are simultaneously turned ON/OFF.
When the selected item is turned ON, the ✔ mark is attached.
(3) Built-in of co-processor
Internal TT target is displayed on the Chart.
3 Basic Operation of ECDIS
3-40
Advertisement
Table of Contents
