Table of Contents
Advertisement
4.1.3.8 Creating a Route Using EBL/VRM Keys and
The following shows the way how to make a route using the EBL/VRM keys and dials on the operation
panel. (You can mix the EBL/VRM operation with the button operation on the screen mentioned earlier.)
Note:
• Before starting, be sure that [(1) Use EBL/VRM] is set to ON.
If not,
In the Graphic Editing menu
Select [MENU] - [(2) Edit] - [(1) Use EBL/VRM] in that order to set it ON.
The EBL cursor is displayed on the screen. (The cursor type changes when [(7) Use EBL/VRM] is
set to ON.) Operate while watching the cursor position displayed at the bottom of the display panel.
1) Press the [EBL1], [EBL2], [VRM1], or [VRM2] key on the operation panel.
2) Move the cursor to the voluntary point. (e.g. cape) and left-click there.
4 Route Planning
Dials
Left-click
Line drawn from own ship
4-54
Be sure that the check mark is attached.
Advertisement
Table of Contents
