Shifting Using The Cursor - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

Do not use the offset function during navigation.

If the equipment is used with the offset value entered as the own ship

position, the position of your ship displayed on the screen is shifted from the

real one, and accidents may result.

When the offset values are entered, the background color of the position

panel on the display panel is colored in sky blue, and the message "Position

Shift" alarm is displayed in the message display area. Check these

indications, and cancel the offset function if necessary.

3.35.1 Shifting Using the Cursor

1) In the normal menu

Select [MENU] - [(4) Ownship/Track] - [(1) Adjust] - [(1) Cursor] in that order.

The "Confirmation" panel opens.

2) Left-click the [OK] .

The ship offset cursor

3) Rotate the trackball and move the cursor to the position

you want, and then left-click there.

4) The "Location/Attributes-Reference Point" panel is

5) Own ship will shift to that position.

3 Basic Operation of ECDIS