Selecting Motion Mode - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

3.7.1 Selecting Motion Mode

You can select Motion mode using the display panel.

• While [Chart Portfolio] is running, Motion mode [Relative] cannot be selected.

(1) Selecting Motion mode using the display panel

1) On the display panel

Left-click the Motion drop-down list.

2) Select one of items (True, Relative, Free) by left-clicking it.

3.7.2 Selecting Azimuth Mode

You can select Azimuth mode using the display panel.

(1) Selecting Azimuth mode using the display panel

1) Left-click the Azimuth drop-down list on the display panel.

2) Select one of items (North Up, Course Up, WPT Up) by left-clicking it.

Then, the display changes according to your selection.

• If you select [Rotation], enter its rotational angle in degrees. (000.0 – 359.9 degrees).

• If [True] or [Free] is selected in Motion mode, "Course Up" and "WPT Up" cannot be selected.

Motion drop-down

Azimuth drop-down

For [Rotation] mode

3 Basic Operation of ECDIS